■Anti-wear agents: Anti-wear agents help protect parts of the engine that are especially susceptible to damage from high temperatures, like cylinder walls, lifters, cams, and piston rings. This additive acts as a protective layer around these components to limit friction in metal-on-metal situations.

The performance of these seals depends to a large extent on a suitable unit load being maintained at the seal-shaft interface. These seals withstand a pressure of 15PSI and their working depends on parameters like shaft diameter, shaft speed, working temperature, service conditions, etc

In recent research, MWCNTs and carbon black were mixed with the butadiene/natural rubber to form a hybrid composite which gives very strong filler links by partial replacement of carbon black based on the m₁:m₂:X (m₁—MWCNT; m₂—reduction amount of carbon black; X-varies from 1 to 6) [40,64]. An internal blending mixer and two-roll milling were used to formulate the composites. The synergistic effect plays a major role in improving the abrasion resistance property due to the partial replacement of carbon black by adding MWCNTs in different ratios. The optimal ratio value of MWCNTs is 5 (parts per hundred of rubber) and 27.5 (parts per hundred of rubber) for carbon black with better resistant to abrasion compared to the matrix material [64]. The vulcanized hybrid composite material reinforced with MWCNT/carbon black at the ratio of 1:1 shows better mechanical properties, curing characteristics, and thermal conductivity. This shows a better tyre thread with an improved endurance life, less curing time, and improved thermal conductivity [42,64]. Fig. 4.4 shows the SEM and TEM images of uncured and cured rubber and Figs. 4.5 and 4.6 show the application of rubber nanocomposites in a tyre application.

Also known as a Rotary Shaft Seal, Shaft Seal, Lip Seal, Elastomeric Lip Seal or any variation of these. It is a simple device for excluding dust, dirt, water or any other contaminant whilst retaining lubricant in rotary shaft equipment. Generally, it has been developed as a means of protecting the bearings of rotating shafts.

1. Sealing Element