4 strand barbed wire fence cost

Latest articles



  • The blade thorn rope is formed by the punching steel plate and mechanically rolled on the steel wire. The width of the blade is 22mm, the vertical distance between the two blades is 15mm, the longitudinal distance between the blade is 34mm, and the diameter of the core wire is 2.5mm. The blade is made of Q195 steel plate with 0.5mm thickness.

  • Hexagon mesh weight calculation method is: hexagon mesh weight calculation method: wire.× wire.× base x length x width ÷2=kg base: 1/2′=2.151′=1.273/4′=1.65/8′=1.875/4′=1.091′x1/2′ : 3′=0.4 warp.× Warp.×2x length x width ÷8×3=kg

  • Links

  • 7
  • Another important benefit of the A7RTC spark plug is its long lifespan. This spark plug is made from high-quality materials that are designed to withstand the harsh conditions inside your engine. As a result, the A7RTC spark plug can last for a long time, providing reliable performance and ignition for your vehicle.
  • Identical application as type ST, but the outside rubber surface has a ribbed design to absorb thermal expansion of the housing.
  •  

  • Viton® 
    High level of chemical resistance 
    High temperature resistance

  • Chemicals
  • 2) Special seal types and their features

  • The edge of the metal is finely ground after seal manufacture in a centerless grinder to enable an interference fit in the oil seal housing. A slight chamfer on the outer diameter (OD) of the seal is desirable for easy assembly. The sealing lip is prepared by buffing, grinding or cutting away the rubber flash which occurs at the sealing edge. A fine sealing edge creates sufficient pressure on the shaft to minimise spring load, leading to lower friction whilst maintaining effective seal performance. The garter spring plays an important role in the efficiency of the oil seal. If its tension is too high, heat will be generated between the sealing lip and the shaft, and result in rapid wear of the lip. If too low, the spring will be ineffective and the sealing lip will be worn away leading to leakage of the fluid.