What Are Oil Seals?

No code: without minor lip

CONVENTIONAL OIL SEALS

PTFE Oil Seals - A relatively new and exciting oil seal, the use of polytetrafluoroethylene means that they can withstand dry or unlubricated operations. With a massive thermal range of  -130ºC to +200ºC and a strong resistance to chemicals, they are considered to be the future of rotary shaft seals.

Requirements of the shaft
Even more important than a correct interference fit of the Oil Seal is a perfectly smooth shaft in the region of the seal, particularly if shaft surface speed is high and the medium to be sealed is under a certain amount of excess pressure. The surface roughness of the shaft depends on the average profile depth Ra of the tool marks caused by the machining process. Oil Seals made of PTFE require, independent of the surface speed, a surface roughness of between 0,1 to 0,2 mm, because PTFE has less wear resistance than rubber seals. For normal circumstances, the shaft in the region of the seal must have a surface roughness of approximately:  To summarize, the surface of the shaft in the region of the seal should not have noticeable machining marks. For pivoting shafts and other difficult or critical sealing applications, it is recommended that Oil Seals with a helical groove hydrodynamic pattern, which has a pumping effect, be used. When grinding and polishing, an axial movement of the grindstone along the shaft must be avoided in order to prevent machine lay. 

Advantages:
– Very good fitting stability avoiding pop-out of the seal
– Modern lip design provides low radial forces
– Superior radial stiffness, especially for very large diameters
– Cost effective for expensive elastomer materials
– Suitable for use in combination with axial seal

7. Selecting high-quality oil seals

Standard Sealing Lip Designs