2x2 welded wire mesh

Post-plating treatment of hot-dip galvanized wire for enhanced protection function, decoration and other special purposes (passivation, hot melting, closing and hydrogen removal, etc.). After galvanized, chromate passivation or other conversion treatment is generally required, forming the corresponding type of conversion film is one of the key processes to ensure the quality of plating. Because hot-dip galvanized wire has a long anti-corrosion life, a wide range of applications, hot-dip galvanized wire to net, rope, wire and other ways are widely used in heavy industry, light industry, agriculture, widely used in the manufacture of wire mesh, highway guardrail and construction engineering and other fields.

High quality galvanized wire in general, the zinc layer attached to the surface of the wire is relatively thick, so when we buy galvanized wire, as long as we look at the thickness of the zinc layer machine, we can generally judge whether the quality of galvanized wire is high quality.

For the specification of galvanized wire, the galvanized wire produced by our factory can range from No.8 to No.22, which refers to the BWG standard, that is, from about 4mm to 0.7mm, which can basically cover the type required by the customer. As for the raw material of galvanized wire, normally, we use Q195 mild steel, and some factories will also use SAE1006 or SAE1008. The following is the zinc coating, for galvanized wire, this is very important, the general zinc coating is about 50g/m2 to 80g/m2, some customers need high zinc galvanized wire, zinc coating can reach 200g/m2 to 360g/m2. The tensile strength of galvanized wire is usually 350n/m2 to 800n/m2. Then there is the packaging specification of galvanized wire. The specifications of small rolls of galvanized wire are 50kg/ roll, 100kg/ roll and 200kg/ roll. Of course, there are large rolls of galvanized wire, the weight can reach 300kg/ roll or 800kg/ roll.